喷雾干燥机是^广泛使用的颗粒的形成和干燥的工业过程。喷雾干燥机是干燥固体从液体原料的粉末，颗粒或附聚物颗粒形式适合于连续生产。喷雾干燥是理想的，当^终产品必须符合^的质量标准，关于粒度分布，残留水分含量，堆积密度和粒子形态。 GEA尼鲁装备工程师的物业我们的客户需要的产品和生产所需的过程。由于数据获得了超过70年的经验，在全球范围内的植物有10,000多种，30000从我们的测试中心的测试报告的参考列表，没有人知道更多关于工业喷雾干燥的作用比GEA尼鲁。

喷雾干燥器的设计和技术提供的能力，以控制通过喷雾干燥过程中的粉末状的粉末生产的。 GEA尼鲁喷雾干燥器的设计，生产性能，如粒径，堆积密度，水分含量，溶解性，分散性等完全按照用户所希望的。该产品适用于所有可泵送的产品，无论是热还是不热敏感。

化学品干燥机 食品与乳制品干燥机 试验和小型干燥机

Spray Drying Advantages Spray drying is the most widely used industrial process for particle formation and drying.  Spray drying is well suited to the continuous production of dry solids in powder, granulate or agglomerate particle form from liquid feedstocks. Spray drying is ideal, when the end-product must comply with precise quality standards regarding particle size distribution, residual moisture content, bulk density and particle morphology. GEA Niro is equipped to engineer the properties our customers want into the products and the processes needed to produce them.  With data gained from more than 70 years of experience, a reference list of some 10,000 plants across the globe and 30,000 test reports from our test centre, no-one knows more about the role of industrial spray drying than GEA Niro.

The spray dryer design and technology provides the powder producer with the ability to control the powder form through the spray drying process. GEA Niro spray dryers are designed to produce properties such as particle size, bulk density, moisture content, solubility, dispersibility etc. exactly as desired by the user. The products are applicable to all pumpable products, whether heat or non-heat sensitive.

Chemical Dryers Food & Dairy Dryers Pilot & Small Scale Dryers